TECHNICAL DETAILS

• Nominal pressure PN 10 / PN 16 / PN 25.
• Nominal diameter DN 50…DN 1000
• Resilient Seated Gate/Sluice Valve in accordance with EN 1074
• Face-to-face length acc. to EN 558, basic series 14/15/BS5163 /IS14846
• With flange ends on both sides acc. to EN 1092-2
• Suitable for both directional use
• Body and Disc made of ductile Iron – GGG50
• Wedge made of ductile Iron – GGG50 with EPDM encapsulation
• Body and Bonnet: Epoxy coating with approx. 250 microns – WRAS approved powder
• Stem: Stainless steel SS420/410
• Stem Nut & Bearing: Brass/Bronze
• Gasket: EPDM
• Bolts made of stainless steel A4
• Epoxy coating is food grade approved.

PRODUCT DETAILS

Product Features:

• Elongated bearing: this helps to hold dynamic 3 no’s O-ring which act as a sealing member during operation of the valve to avoid leakage through bonnet & shaft, it provides triple protection against the leakage,
• Wedge Nut: the wedge nut is replaceable, which makes it low & easy maintenance.
• Sliding Shoe/Cap: this allows to decease the operating torque due to lower friction between the metal body & the plastic sliding shoe/cap, which in- turn make the valve easy for operation
• Stem: The stem is made of stainless steel with 17% chromium.
• Valve Feet: This helps to keep the valve in stable standing position.

Range of application

• Under the ground/chamber-less/buried installation
• Above the ground Installation
• Chamber Installation/On the pipeline in Plants, Etc.,
• On/Off application

Download technical documentation